Gemeinsam mit unserem Finanzierungspartner TARGOBANK ermöglichen wir dir eine bequeme Finanzierung in monatlichen Raten – für Warenkörbe ab 99,00 €.
| Laufzeit | Effektiver Jahreszins |
|---|---|
| 6–12 Monate | 5,90 % |
| 15–21 Monate | 6,90 % |
| 24–30 Monate | 7,90 % |
| 33–36 Monate | 8,90 % |
Nur innerhalb Deutschlands verfügbar. Finanzierung ab 99,00 € Warenkorbwert und vorbehaltlich der Prüfung durch die TARGOBANK.
Wähle an der Kasse einfach die Zahlungsart TARGOBANK Finanzierung und folge den weiteren Schritten. Nach Abschluss deiner Bestellung gelangst du zum Finanzierungsantrag der TARGOBANK.
Die Finanzierung erfolgt vorbehaltlich der Prüfung und Genehmigung durch die TARGOBANK. Die Angaben sind unverbindlich; maßgeblich sind die Konditionen im individuellen Finanzierungsangebot. Eine monatliche Mindestrate kann gelten.
Piece
The Stardust 5% EPDM Overlayer protective flooring combines a rubber base with an additional hot-laminated top layer. The particularly smooth surface and cream-white EPDM flecks make it the ideal choice for equipment areas and free weight areas where appearance also matters. Dust, chalk, and minor soiling are less noticeable than on solid black rubber mats.
In the size 1000 × 1000 mm, the mat can be used for individual training areas or continuous areas in the home gym and fitness studio. You can choose between 15 and 20 mm thickness.
The 15 mm version is suitable if you mainly train on strength training equipment, a power rack or a weight bench and place weights down in a controlled manner. It is a suitable choice when floor protection under the equipment is the priority. Its lower profile makes transitions to adjacent flooring easier, and the individual mats are also easier to transport and cut.
If you regularly train with dumbbells or barbells and want additional impact and vibration damping when setting them down, the 20 mm version is recommended. This is particularly interesting for areas where weights frequently make contact with the floor. However, take into account the higher profile, for example under doors, and the higher weight when laying the mats.
Important: Even 20 mm does not provide blanket approval for dropping weights. The substrate, floor construction, weight and drop height must be considered separately.
For the 20 mm version, a REACH declaration of conformity is provided. The fire rating of this version is classified as Efl.
The Standard protective flooring has a classic black granulated surface. Stardust adds an additional, particularly smooth top layer with cream-white EPDM flecks to the rubber base.
Choose Stardust if you prefer a flecked training surface where dust and chalk are less noticeable. A higher permissible load capacity cannot be inferred from the additional top layer alone.
You can find other versions under Protective flooring for home gym and fitness studio.
Plan your area using the mat dimensions and allow for cuts along walls or built-in fixtures. A sharp utility knife with a sturdy guide rail is suitable for cutting. Make several shallow cuts and then remove any loose rubber particles.
For sensitive flooring: Clarify material compatibility with the manufacturer of your existing floor before laying. The top layer does not prevent the rubber underside from coming into contact with the substrate. If necessary, a separator suitable for both materials should be provided.
Rubber mats have a material-specific odor. This can be particularly noticeable in small or poorly ventilated rooms. Take this into account when planning the room and ensure regular air exchange – especially in training rooms without windows.
1x Stardust protective flooring in the size 1000 × 1000 mm in the selected thickness.
Item number 15 mm: MS-1000-OV-STD-15
Item number 20 mm: MS-1000-OV-STD-20
Cut edges of rubber mats generally do not need to be sealed or additionally treated after cutting. The material typically does not fray and can be laid directly after a clean, straight cut.
For the cleanest result, we recommend cutting the mat with a sharp utility knife and a sturdy cutting guide in several shallow passes. Any loose rubber particles should be removed afterwards.
Discoloration on light or sensitive floor coverings cannot be fundamentally ruled out. The Stardust floor protection mat is made of SBR rubber with a coated top side. This top layer does not prevent direct contact between the rubber underside and your floor.
In particular, with vinyl and PVC floors, prolonged contact with certain rubber materials can cause permanent discoloration. With light gray cement screed floors and laminate, compatibility depends on the respective surface and sealant. We cannot therefore provide a blanket assurance that no changes will occur.
We recommend clarifying compatibility with the manufacturer of your floor covering or the flooring installer before installation. If necessary, a migration-inhibiting separator layer suitable for both materials should be used. A test in an inconspicuous area can provide initial clues, but does not reliably rule out long-term discoloration.
Yes, the Stardust floor protection mat is also suitable for heavy power racks and is designed for both private and professional training environments. The Stardust mat is made of robust SBR rubber granulate with an additional, durable surface layer. This is permanently bonded to the underlying rubber layer through a hot lamination process and is designed for intensively stressed training surfaces. Here is an overview of the key differences from our standard floor protection mat:
1. Load Capacity: Both mats are suitable for setting up heavy fitness equipment and racks. The Stardust additionally features a particularly durable top layer. A flat-rate maximum load capacity in kilograms is not specified for the mats.
2. Slip Resistance: Both variants have a slip-resistant surface and provide a stable foundation for strength training when installed properly.
3. Material: The standard mat is made of compacted, recycled rubber granulate. The Stardust has an additional high-quality, hot-laminated surface layer.
4. Appearance and Maintenance: While the standard mat has a classic black granulate surface, the Stardust is characterized by its cream-white speckled finish. This means dust, chalk and minor soiling are less noticeable during training.
Both variants are available in the format 100 × 100 cm as well as in 15 mm and 20 mm thickness.
Our Recommendation: In principle, both floor protection mats are suitable for setting up a power rack. For normal strength training without regular dropping of heavy dumbbells, 15 mm is usually sufficient.
If you also desire higher impact and vibration damping, we recommend the 20 mm version. The Stardust is a particularly attractive choice if, in addition to robust floor protection, you also value high-quality surface aesthetics. For particularly heavy racks with high point load, you should also ensure adequate load distribution under the base feet and a load-bearing substrate.
Not sure which product is right for your fitness goal? No problem! Our experienced team will take the time to help you – by phone (08142/ 448666), email, or in person at our showroom. Together, we’ll find the best solution for your needs.
